 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MJD32C Low voltage PNP power transistor Features NPN type is MJD31C Surface-mounting TO-252 power package in tape & reel Applications 3 1 DPAK TO-252 General purpose switching and amplifier Description The device is manufactured in Planar technology with "Base Island" layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage. Figure 1. Internal schematic diagram Table 1. Order code Marking MJD32C Package DPAK Packaging Tape & reel Part number MJD32CT4 June 2007 Rev 1 1/9 www.st.com 9 Electrical ratings MJD32C 1 Electrical ratings Table 2. Symbol VCBO VCEO VEBO IC ICM IB PTOT Tstg TJ Absolute maximum rating Parameter Collector-base voltage (IE = 0) Collector-base voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current Base current Total dissipation at Tc = 25C Storage temperature Max. operating junction temperature Value -100 -100 -5 -3 -5 -1 15 -65 to 150 150 Unit V V V A A A W C C 2/9 MJD32C Electrical characteristics 2 Electrical characteristics (Tcase = 25C unless otherwise specified) Table 3. Symbol ICES ICEO IEBO Electrical characteristics Parameter Collector cut-off current (VBE = 0) Collector cut-off current (IB = 0) Emitter cut-off current (IC = 0) Test Conditions VCE =-100V VCB =-60V VEB =-5V Min. Typ. Max. -20 -50 -0.1 Unit A A mA Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) VCE(sat) (1) VBE(on) (1) hFE Collector-emitter saturation voltage Base-emitter on voltage DC current gain IC =-30mA -100 V IC =-3A IC =-3A IC =-1A IC = -3A _ _ IB =-375mA VCE=-4V VCE =-4V VCE =-4V 25 10 -1.2 -1.8 50 V V 1. Note (1) Pulsed duration = 300 ms, duty cycle 1.5% 2.1 Electrical characteristic (curves) Figure 2. Safe operating area Figure 3. Derating curve 3/9 Electrical characteristics Figure 4. DC current gain Figure 5. DC current gain MJD32C Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage Figure 8. Collector-emitter on voltage Figure 9. Resistive load switching time 4/9 MJD32C Figure 10. Resistive load switching time Electrical characteristics 2.2 Test circuits Figure 11. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 5/9 Package mechanical data MJD32C 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/9 MJD32C Package mechanical data TO-252 (DPAK) MECHANICAL DATA mm MIN. A A1 A2 B B2 C C2 D E G H L2 L4 V2 0.60 0 o DIM. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 inch MAX. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 MIN. 0.087 0.035 0.001 0.025 0.204 0.018 0.019 0.236 0.252 0.173 0.368 0.031 1.00 8 o TYP. TYP. MAX. 0.094 0.043 0.009 0.035 0.213 0.024 0.024 0.244 0.260 0.181 0.398 0.8 0.024 0 o 0.039 0o P032P_B 7/9 Revision history MJD32C 4 Revision history Table 4. Date 25-Jun-2007 Revision history Revision 1 Initial release. Changes 8/9 MJD32C Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9 |
Price & Availability of MJD32CT4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |